Management Software Using HarnessEye/web 208Front Panel Indicators screenThis is a function for a Magnia Z300 only. The Magnia Z300 is equipped with an upperand lower front panel indicator, each displaying up to 16 characters (if a scroll is used, itdisplays 40 characters). The front panel indicator has three display screens, and displaysone of them.These screens can be selected using the Display Change Button. One of the threescreens is used for notification of hardware-dependent errors. This screen is notdisplayed during normal operation but is given priority over other screens if an erroroccurs.The other screens are {Panel View 1} and {Panel View 2}.On {Panel View 1}, information specific to the machine currently selected can bedisplayed or edited. {Panel View 2} displays alarm information when an alarm is reportedto the Management Proxy.When you click Front Panel Indicators, the following screen displays.Item ExplanationPanel View 1 You can edit the panel strings that indicate informationparticular to the agent machine.Upper Specifies the characters provided on the upper part of the frontpanel indicator.Lower Specifies the characters provided on the lower part of the frontpanel indicator.Set Saves the specified character strings.Panel View 2 Displays the fault message from the agent.Upper Displays the characters provided on the upper part of the frontpanel indicator.
