Server Setup Tool Starting SST 171Selecting the Onboard Network Adapter driverWhen the installer detects the network adapter, the following screen appears. SelectModify to replace the driver.1 Move the cursor to “Network boards” using the arrow keys, and press the Enter key.2 When the “List of network drivers currently selected” appears, delete the drivers withthe key.3 Insert the Intel LAN NetWare Driver created with Toshiba Server Setup Tool in thefloppy disk drive.4 Select Add an unlisted driver by pressing the Insert key.5 Press the Enter key to copy the drivers.When the drivers are detected, they are added to the “List of network driverscurrently selected.”6 Select “E100B.LAN.”Continue the installation by following the on-screen instructions.NetWare 5.1 Post-Installation ProcedureThis section reviews the procedure after installing NetWare 5.1Restoring the original boot sequenceUse the BIOS setup utility to move the CD-ROM drive lower in the boot sequence. Press<-> to move “CD-ROM Drive” to a lower order in the boot sequence than “+Hard Drive”.|| CE100B.LAN || Intel(R)PRO PCI Adapter(CHSM Spec 1.11)|||| E100B.LAN || Intel(R)PRO PCI Adapter(AHSM Spec 3.31)||The following drivers were detected for this server. Add, change,or delete device drivers as needed.Device types Driver namesStorage Devices: IDEATA, IDECDNetwork boards: CE100BNetWare loadable modules (optional)options_Continue_Modify
