Hardware Diagnostics HW Diagnostics Program Main Menu 119Running Test (02. RUNNING TEST)1 Using the arrow keys, highlight 02. RUNNING TEST on the HW DiagnosticsProgram Main Menu.2 Press Enter.When a test is selected, the TEST PARAMETER Screen appears:TEST PARAMETER Screen for 02. RUNNING TESTSelect one of the following, using the arrow keys:❖ 01. Go to TestSelect this option to start the RUNNING TEST.When the test is completed, the test result appears on the screen in large text.If you need to stop the test program, press + .❖ 02. Test ITEM EDITSelect this option to see the items currently in the RUNNING TEST and to add or deleteindividual tests. See description below.❖ 03. Finish BUZZER SoundSelect this option so that when the Server finishes the running test, the beep sounds.❖ 99. Exit to DIAGNOSTIC MENUNo error has been detected. OKThe test has been compulsorily ended or any error has beendetected.FAILEDNOTE: To check the error log, select 03.LOG UTILITIES on the HW DiagnosticsProgram Main Menu. For the key operation on the error log display, refer to"Checking error log" in this chapter. If the test in progress has been stopped, thetest result is not displayed.[ TEST PARAMETER ]01.Go to Test02.Test ITEM EDIT03.Finish BUZZER Sound : OFF04.Exit to DIAGNOSTIC MENU
