Toshiba H7 Operation Manuals

Also see for Adjustable Speed Drive H7 Series: Applications Workbook Specification

Contents

H7 ASD Operation Manual 33PG Position — Displays the Pulse Generator Position.RR — Displays the RR input value as a percentage of the full range of the RR value (potentiometerinput).*VI/II — Displays the VI input setting as a percentage of the full range of the VI/II value.Note: * The VI/II input represents two analog inputs (and terminals). The VI inputterminal is primarily used for a 0 – 10 VDC analog signal and the II inputterminal is used for current loop applications, such as with a 4-20 mA signal.Either may be used as a frequency or torque command source; however, the twocannot function simultaneously. Throughout this manual they will be listed asVI/II.RX — Displays the RX input setting as a percentage of the full range of the RX value (-10 to+10 VDC input).RX2 — Displays the RX2 input setting as a percentage of the full range of the RX2 value.Note: The RX2 function is available on the ASD-Multicom option board only.FM — Displays the output frequency value as a percentage of the full range of the FM value.AM — Displays the output current as a percentage of the full range of the AM value.Option Type — Displays the type form number of the installed ASD-Multicom option board.Option Term A — TBD.Option Term B — TBD.Option Term O — TBD.Option Term P — TBD.Max. Output — TBD.Fault Status — Displays the current fault or No Fault.www . ElectricalPartManuals . com