Siemens SINUMERIK 840DE sl Commissioning Manual

Also see for SINUMERIK 840D sl: Manual Function manual Function manual Function manual Function manual

Enabling the graphic tool and magazine display functionMake the following settings when the tools and the magazine should be representedgraphically:MD52271 $MCS_TM_MAG_PLACE_DISTANCE Distance between individual magazine lo‐cations in the unit of measurement of thebasic NC system.> 0 The tools and magazine locations are displayed graphically.= 0 The tools and magazine locations are not displayed graphically.You must make the following settings on the user interface:1. Press the "Settings" softkey in the "Tool list" window.The "Settings" window opens.2. Activate the "Switch on graphical magazine display" checkbox.This checkbox is offered only when the MD52271 $MCS_TM_MAG_PLACE_DISTANCEmachine data has a value > 0.Supplementary conditions:● MD52200 $MCS_TECHNOLOGY = 2 (milling)● MD52201 $MCS_TECHNOLOGY_EXTENSION = 0Default settings for unloading/loading and relocatingMD52272 $MCS_TM_TOOL_LOAD_DEFAULT_MAG Default magazine for loading tools.= 0 No default magazine, default valueMD52273 $MCS_TM_TOOL_MOVE_DEFAULT_MAG Default magazine for relocating tools.= 0 No default magazine, default valueMD52274 $MCS_TM_TOOL_LOAD_STATION Number of loading station.= 0 All configured stations are considered, default valueInput limits for wear inputMD51212 $MNS_TM_WRITE_WEAR_ABS_LIMIT Maximum value of the tool wear.MD51213 $MNS_TM_WRITE_WEAR_DELTA_LIMIT Maximum differential value of restricted toolwear input.MD51214 $MNS_TM_WRITE_LIMIT_MASK Range of validity of the restricted tool wearinput.Tool management12.1 Machine data for tool managementSINUMERIK Operate (IM9)168 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1