Siemens SINUMERIK 840DE sl Commissioning Manual

Also see for SINUMERIK 840D sl: Manual Function manual Function manual Function manual Function manual

1.2 Hardware configuration of PCU 50.51.2.1 Network settingsThe PCU 50.5 has two Ethernet interfaces with default settings suitable for connection toSINUMERIK solution line:3&8; ;Figure 1-1 Ethernet interfaces of the PCUHardwaredesignationsDesignation inPCU Base Software1ConfigurationX1 Local Area Connection 2 Preset as a DHCP client for connection to a company net‐work.The IP address is dynamically fetched from the DHCP serverat X1.X2 Local Area Connection Preset as a SINUMERIK DHCP server for connection to asystem network.A fixed IP address is preset at X2: If 192.168.214.241 is freein the system network, it is set.Otherwise you can view the allocated fixed IP address in theControl Panel.1 The network designation may deviate depending on the system.Further information●Manual SINUMERIK 840D sl Operator Components and Networking● Setting the IP address and domain (Page 32)● Adapting the firewall settings (Page 67)● Remote access (Page 165)● Network settings in the Service Center (Page 125)1.2.2 Partitioning of the SSDThe PCU 50.5 has a SSD with 80 GB storage capacity. The SSD is already partitioned andpre-assigned by the PCU base software as follows:Name System (C:) Data (D:)File system NTFS NTFSDelivery condition1.2 Hardware configuration of PCU 50.5PCU Base Software (IM10)10 Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1