3-293Operation Examples (Distance measurement)DATA SAVE? (Do you want to save data ?) (YES=[MOVE]/NO=[ESC])REFERENCE IMAGESYSTEM I/OMEAS CONDITIONSSAVINGContinued from the preceding page(12) Returning to the MAIN OPS MENU1. Press the ESC key.- The screen will return to the [SYSTEM SETUP] menu.- Move the cursor to 9SAVE IN FLASH MEM (save data in flash memory) or 0OPERATIONS with the up and down keys, and press the SET key.- The following message will be displayed on the upper part of the screen.- Press the SET key.- The data saving operation will start, and the progress will be displayed on the bottomof the screen.When the data has been saved in the IV-S20 flash memory, the display will change from"SAVING" to "SAVING COMPLETE."Note:· If the ESC key is pressed, the settings you entered will not be saved in the IV-S20flash memory. In this case, if the power to the IV-S20 main housing is turned OFF, orif the type No. is changed, the settings will be deleted.2. Press the ESC key.- The screen will return to the [MAIN OPS NENU].- If the cursor is moved to 0OPERATIONS in step 1 above, the screen will automaticallyreturn to the MAIN OPS MENU.Continued on the following page
