3-33Operation Examples (Area measurement by binary conversion)132TYPE00-MEAS11MEAS SELECTION NO CHECK-DEG-OF-MATCHDST&AGL MES. ( GRAY&EDGE GRAV)INSPECT-LEAD MEASR-BIN-AREACNT-BIN-OBJ LABEL-BIN-OBJPOINT MEAS3SELECT CAMERA CAM1 CAM24COPY EXEC TYPE00 MEAS1 NO5INITIALIZATION EXEC6MEAS.PROG. COND (TO NEXT SUB-MENU)7EVALUATION COND (TO NEXT SUB-MENU)8NUMERIC CALC COND (TO NEXT SUB-MENU)9OUTPUT CONDITIONS (TO NEXT SUB-MENU)0UPPER MENU1[OBJECT TYPE COND]1OBJECT TYPE NO. 00(0~15)2EDIT COPY( TYPE00) INITIALIZE3TITLE REGISTRATION (TO NEXT SUB-MENU)4MEAS.0, CAMERA1 NO (TO NEXT SUB-MENU)5POS. ADJ.CAMERA1 NO ADJ. [REG. 0-1PNTSXY6MEAS.0, CAMERA2 NO (TO NEXT SUB-MENU)7POS. ADJ.CAMERA2 NO ADJ. [REG. 0-1PNTSXY8SELECT CAMERA IMG NO CAM1 CAM1 CAM1&20MEASUREMENT 1 NO (TO NEXT SUB-MENU)qMEASUREMENT 2 NO (TO NEXT SUB-MENU)wMEASUREMENT 3 NO (TO NEXT SUB-MENU)eFINAL CALC RESULT (TO NEXT SUB-MENU)rFINAL OUTPUT COND (TO NEXT SUB-MENU)tSYSTEM-IN/OUT (TO NEXT SUB-MENU)yHALT MEAS ON NG NO YESuUPPE R MENUF C1 H132[MEASURING COND] (TYPE00-MEAS.1-MEAS-BIN-AREA)1REGST NO. 00(0~15) REG.NO YES2BINARY AREA COND (TO NEXT SUB-MENU)3UPPER MENUContinued from the preceding page(3) Operation on the [OBJECT TYPE COND] menu1. Move the cursor to 0MEASUREMENT 1 and press the SET key.- The [TYPE00-MEAS1] (type: 00, measurement: 1) menu will be displayed.(4) Operation on the [TYPE00-MEAS1] menu1. Move the cursor to 1MEAS SELECTION (select measurement) and press the SET key.2. Move the cursor to MEASR-BIN-AREA (area measurement by binary conversion) and pressthe SET key.3. Move the cursor to 6MEAS.PROG. COND (conditions of measurement program) and pressthe SET key.- The [MEASURING COND] (measurement condition) menu will be displayed.(5) Operation on the [MEASURING COND] menu1. Move the cursor to 1REGST NO. (register number) and press the SET key.2. Move the cursor to YES, and press the SET key.-Item 2will be highlighted.3. Move the cursor to 2BINARY AREA COND (condition for measurement window) with theup and down keys, and press the SET key.- The [BIN.AREA SET] (binary zone setting) menu and a measurement window will bedisplayed.Continued on the following page
