10-11PC Function10[RESULTS OUTPUT] (TYPE00)1PAGE.NO. (0~7) REG.NO YES2SET POSITION MOVE3INPUT SIGNAL AUXRLY C112(0~127) EXT-INP X0(0~6)TMR TM0(0~7) CNT CN0(0~7)AN00(0~15) OUT Y00(0~15)4LOGICAL SYMBOL5OUTPUT SIGNAL OUT Y00(0~15) AUXRLY C000(0~127)TMR TM0(0~7) SET-VL000(000~999)CNT CN0(0~7) SET-VL000(000~999)DEL.6UPPER MENU[PAGE0]INPUT0LOGICINPUT1LOGICINPUT2LOGICINPUT3LOGIC10 2 3 4 5 6 7 OUTDEL.312C000From the preceding page[PAGE0]INPUT0LOGICC0000 1 2 3 4 5 6 7 OUTY00Continued on the following page(3) Ladder circuit 2 (setting output signals)1. Move the cursor to item 2 SET POSITION with the up and down keys, and press the SET key.- Move the cursor to the row where a ladder circuit output relay will be placed, and press the SETkey. An output relay can only be placed only on rows where input signals have already beenplaced.2. Move the cursor to item 5 OUTPUT SIGNAL with the up and down keys, and press the SETkey.3. Select the kind of output signal and the number (set value). After moving the cursor to thedesired output signal with the left and right keys, select a number (set value) with the up anddown keys, and press the SET key.- The output symbol and signal will be displayed on the row specified in step 1.Display example:
