3-73Operation Examples (Area measurement by binary conversion)F L C1ALLC2NOVX.X(TYPE00)OKMEAS. XXXXXXmsMEAS1 CAM1 MEAS-BIN-AREAREGST NO. 00(0~15)AREA 001884 OKFinal evaluation result (*1)Measuring timeArea (pixel count) andevaluation result[Display of the measured result]MSR-CHNG REG-CHNG PC-MONTR SET-SCRN MANL-TYP-CHGX0~6: Y0~7: BUSY:*2Continued from the preceding page(11) Measuring the areaPress the TRG/BRT key, and the size of the object in the image in the window will be displayed asa pixel count.*1 The final evaluation result will be displayed as "OK" in the upper left corner of the screen whenall of the items have been evaluated acceptable.If there is a single unacceptable item, "NG" will be displayed.When measuring an object area with the binary image, only the size of the object is measured.If the object meets to the conditions specified in step (9) (within the range between the upperand lower limit values), "OK" will be displayed.*2 When the judgment result is OK, Y0 will be turned ON because we set it that way in step (9),and a filled box will be displayed in the Y0 position at the bottom of the screen. (If the resultis NG, an empty box will be displayed in the Y0 position at the bottom of the screen.)
