9-1139Existence inspection by point measurementSelection of item 3Point numberAuxiliary relyP000 to P255C000 to C127** When AV-LIGHT-LEVEL (average light level) is selected for the processing mode,the setting range is P000 to P127.· Items 2 to 5 will be displayed when item 1 is set to YES.· The input signals which maybe set depend on the selection made in item 3 as follows:From page 9·111: When BIN-CONV (binary) was selected for the processing mode.Continued from the previous page: When AV-LIGHT-LEVEL (average light level) is selectedfor the processing mode.DEL.[OUTPUT CONDITIONS] (TYPE00-MEAS.1-POINT MEAS)1 NO. 0(0~4) REG.NO YES2 SET POSITION MOVE3 INPUT SIGNAL POINT NO.000 (0~255) AUXRLY C000 (0~127)4 LOGICAL SYMBOL5 AUX.RLYC000 (0~127) DEL.6 R MENUPAGE0]INPUT0LOGICINPUT1LOGICINPUT2LOGICINPUT3LOGIC10 2 3 4 5 6 7 OUTReturns to the MAIN OPS MENU.Continued on the following page· For more information on output conditions, see the “PC Function” in Chapter 10.Input signals
