Menu
Sharp IV-S20 User Manual
                                                                                                                                                                                                                                                                                                                                                                                                               | |
Contents
|
9-15Shared settings9[NUMERIC CALC] (TYPE00-MEAS.0-POS-DEVIATION)1CALC.RESULT N00(0~15)2OBJECT TYPE NO COORD[X Y] DEVIAT[x y] MATCH [M]ANGL-DEV[B] NUM-CALC[NC] CNST[C]3FORMULA REG.0(0~7) MDL0(0~1) N00(0~15)DEL END4UPPER&LOWER LIMIT + 00000650.0~+00000700.05OUTPUT NO Y0(0~7) C000(0~107)6TEST A RUN (SET KEY)7UPPER MENUN00N01N02N03[C][X]00000002.00X0 N00 Y000000400.0 00000410.0 00000406.0 OK· The number of styles may be set as follows, depending on the selections made in items and .The display will be different foreach measurement program.* 2* 1* 3* 4* 6* 7* 5Ex.:The coordinates [X] is multipliedby 2 and the results is stored inN011. The constant 2 is stored inN002. The X1 value of the registra-tion number and the value inN00 are multiplied, and theresult is stored in N01.The numbers from 0 to 7 infront of the characters areregistration numbers.Numerical calculation1CALC. RESULT(calculation results)2OBJECT TYPE3FORMULA(registation number)4UPPER&LOWER LIMIT5OUTPUT6TEST A RUN(make a test run)7UPPER MENUSetting details (selections)You may set the location where the arithmetical operation results of the specified output datawill be stored, from locations 00 to 15.The results will be displayed 4 as one unit at position * 1 above.Select the type of data being calculated.A number of style settings are used.· The style type is selected using the left and right keys and the numerical values are enteredusing the up and down keys.The settings are displayed at N00 to N15, position * 3 above.The first line of the display will change, according to the selection made in item .Note: Please enter a smaller number for N (00 to 15) in the formula than N (00 to 15) of item1CALC. RESULTEnter the upper and lower limits for making a judgment. This setting will be displayed in N00to N15, at position * 4 above.Setting the output of the calculation results.The output can be set to Y0 to Y7 or C000 to C107. This setting is displayed in N00 to N15,at position * 6 above.Pressing the SET key will store the setting details as well as run a test. Both the numericalresults of the tests and the OK or NG judgment will be displayed at position * 5 and * 7 above.Will return to the [TYPE00-MEAS0] menu.OBJECT TYPECoordinates X/YCoordinate deviationDegree of match MAngular deviation BNumerical calculation NCConstant CModel 00X0 to 7X0 / 0Y0 to 7Y00x0 to 7x0 / 0y0 to 7y00M0 to 7M00B to 7BABS / / TAN / ATAN (00 to 15)-99999999.9 to +99999999.9Model 10X1 to 7X1 / 0Y1 to 7Y10x1 to 7x1 / 0y1 to 7y10M1 to 7M1Item selectionsCoordinates X and Y, positional deviationcoordinates x and y, degree of match MAngular deviation BNumerical calculation NCConstant CThe first line of the displayRecord 0 (0 to 7) Model 0 (0 to 1) N00 (0 to 15)Record 0 (0 to 7) N00 (0 to 15)ABS TAN ATAN N00(0 to 15) (second line isnot displayed)+00000000.0 (second line is not displayed)(1) The individual numerical calculations for each measuring programThe setting details and procedures for numerical calculations are the same for all measurementprograms with the exception of the point measurement program. In this section we explain theuse of the numerical calculations menu [NUMERIC CALC] for out of position measurements.- The [NUMERIC CALC] (numerical calculations) menu for positional deviation measurement. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved