Samsung DCS-816 Programming Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

Contents

SAMSUNG ProgrammingDCS-816 February, 1999MMC 401 (Page 1 of 1)MMC: 401 C.O./PBX LINEDESCRIPTION:Used to select the mode of the C.O. line. If the PBX mode is chosen, this allowsPBX access codes to be recognised, thus allowing more complete toll restriction(call barring). This mode is assigned on a per–trunk basis. If a trunk requires theuse of the RECALL key, it must be set to PBX mode.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALLACTION DISPLAY1. Press TRSF 401Display shows [701] PBX LINECO LINE2. Dial trunk number (e.g., 704)ORUse UP or DOWN to scroll through trunknumbers and press RIGHT soft key to movecursorORPress ANS/RLS to select ALL[704] PBX LINECO LINE[ALL] PBX LINE?3. Dial 1 for PBX or 0 for C.O.ORUse UP or DOWN to scroll through optionsPress RIGHT soft key to return to step 2[704] PBX LINEPBX LINE4. Press TRSF to store and exitORPress SPK to store and advance to nextMMCDEFAULT DATA: All Trunks C.O. LineRELATED ITEMS: None