Samsung DCS-816 Programming Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

Contents

SAMSUNG ProgrammingDCS-816 February, 1999MMC 601 (Page 1 of 2)MMC: 601 ASSIGN STATION GROUPDESCRIPTION:The station groups that are available in this MMC provide more flexibility in theusage of Uniform Call Distribution (UCD/ACD), AA GROUP and VM/AAapplications. A station, common bell, and ring page can be in more than onegroup, but must all be the same ring type. There is a maximum of 16 membersper group.NOTEA device for announcement, if used, must provide a hookflash and return the call to the group. If astation is in more than one group and attempts to use the In/Out of Group key, it will be removedfrom all groups.GROUP TYPE0 NORMAL GROUP1 VMAA GROUP Can only have distribute or sequential ringing.2 UCD GROUP Has wrap–up capability.3 AA GROUP Can only have distribute or sequential ringing.FEATURE KEY0 TYPE Group type (Normal, VM/AA, UCD, AA)1 RING Ring mode2 OVERFLOW Overflow time3 GRP TRSF Recall time for transfering to group4 NEXT PORT Overflow port5 MEMBER Group member (e.g., station 202)RING MODE0 SEQUENTIAL The first idle station listed in the group will ring. If thefirst is busy, the next idle station will ring.1 DISTRIBUTE The first call will ring the first station listed in the group.The next call will ring the next station listed in thegroup.2 UNCONDITION All the stations listed in the group will ring; busystations will receive off–hook ring.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entry