Samsung DCS-816 Programming Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

Contents

SAMSUNG ProgrammingDCS-816 February, 1999MMC 720 (Page 1 of 1)MMC: 720 COPY KEY PROGRAMMINGDESCRIPTION:Provides a tool for duplicating key assignment from one keyset to another. Thiscan be done on a per–station basis or on all stations, but not on a group of stations.One limitation is that the original and target keysets must be of the same type (i.e.same number of buttons.)PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALLACTION DISPLAY1. Press TRSF 720Display shows [201] COPY KEYFROM:NONE2. Enter the station number to copy to (e.g., 205)ORPress UP or DOWN keys to make selection andpress RIGHT soft key to move cursor[205] COPY KEYFROM:NONE3. Enter station number to copy from (e.g., 203) andcursor returns to step 2ORPress UP or DOWN keys to make selection[205] COPY KEYFROM:2034. Press RIGHT soft key to return to step 2ORPress TRSF to store and exitORPress SPK to store and advance to next MMCDEFAULT DATA: NoneRELATED ITEMS: MMC 107 Key ExtenderMMC 721 Save Station Key ProgrammingMMC 722 Station Key ProgrammingMMC 723 System Key Programming