Samsung DCS-816 Programming Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

Contents

SAMSUNG System Administration and Special Features GuideDCS-816 February, 19993 - 94. Dial the location number (e.g., 05)OR press UP or DOWN to select location and press[205] SPEED DIAL05 : _the right soft key to move the cursorOR press the left soft key to return to step 25. Enter the trunk access code (e.g., 0) followed bythe number to be dialled (e.g., 4264100)[205] SPEED DIAL05 : 0-4264100_OR press the right soft key to return to step 2OR press the left soft key to return to step 3OR press HOLD to clear an entry (if you make an error,use the DOWN key to step back)6. Press the F key to access Program System Speed DialNumbers (above)OR press TRSF to save and exit programmingOR press SPK to save and advance to the next programDEFAULT DATA: NO SPEED DIAL NUMBERS PROGRAMMED3.10 PROGRAM PERSONAL SPEED DIAL NAMES FOR OTHERSTATIONSEach individual station user can program his/her own names, but in cases where this isnot practical, this program allows a system administrator to view or change any station'sspeed dial names. The station speed dial codes are 00-49. Each station begins with 10numbers (00-09) and can be assigned more in blocks of 10 up to a maximum of 50numbers.PROGRAM KEYSUP & DOWN Used to scroll through options.KEYPAD Used to enter selections.SOFT KEYS Move cursor left and right.SPK Used to store data and advance to next program.HOLD Used to clear previous entry.ANS/RLS Used to select ALL.OPERATION1. Press TRSF 106 [201] SPEED NAME00 :2. Dial the station number (e.g., 205)OR press UP or DOWN to select the station and press[205] SPEED NAME00 :the right soft key to move the cursor