Samsung DCS-816 Programming Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

Contents

SAMSUNG System Administration and Special Features GuideDCS-816 February, 19993 - 103. If the selected station has no speed dial bins, thisdisplay will be shown and a new station may be[205] SPEED DIALSPDBLK NOT EXISTselected4. Dial the speed dial location (e.g., 05)OR use UP or DOWN to scroll through the location[205] SPEED NAME01 : _numbers and use the right soft key to move the cursorOR press the left soft key to return to step 25. Enter the name using the procedure in ProgramStation Names (above) and press the right soft key to[205] SPEED NAME01 : SAM SMITHreturn to step 2OR press the left soft key to return to step 36. Press the F key to access Program Personal SpeedDial Numbers For Other Stations (above)OR press TRSF to store and exit programmingOR press SPK to store and advance to the nextprogram3.11 CREATE PROGRAMMED STATION MESSAGESMessages 1-10 are programmed from the factory and cannot be changed. However, youcan create 10 additional 16-character messages (11-20) that fit your company's needs.After programming these messages, inform other employees so they can add the newmessages to the list on the back of their user guides.PROGRAM KEYSUP & DOWN Select the message number.KEYPAD Used to enter characters.HOLD Press to clear entry.Open customer programming and follow the instructions below.OPERATION1. Press TRSF 715 PGM MESSAGE (01)IN A MEETING2. Dial in the message number (e.g., 11)OR press UP or DOWN to make the selection andMGM MESSAGE (11)_press the right soft key to move the cursor3. Enter in the message using the procedure in ProgramStation Names (above) and press the right soft key toPGM MESSAGE (11)IN THE SHOWROOMreturn to step 2 above