Samsung DCS-816 Programming Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

Contents

SAMSUNG System Administration and Special Features GuideDCS-816 February, 19993 - 75. Press TRSF to store and exit programmingOR press SPK to store and advance to the nextprogramDEFAULT DATA: NO SPEED NUMBERS ASSIGNED3.8 PROGRAM SYSTEM SPEED DIAL NAMESThis procedure allows a name to be assigned to each system speed dial location. Thisname enables you to locate the speed dial number when you are using the directory dialfeature. You may assign a name up to 11 characters long.PROGRAM KEYSUP & DOWN Used to scroll through options.KEYPAD Used to enter selections.SOFT KEYS Move cursor left and right.SPK Used to store data and advance to next program.HOLD Used to clear previous entry.OPERATION1. Press TRSF 706 SYS SPEED NAME500:2. Dial the system speed number (e.g., 505)OR press UP or DOWN to select the entry numberSYS SPEED NAME505:and press the right soft key to move the cursor3. Enter the name as shown in Program Station Names(above) and press the right soft key to return to step 2SYS SPEED NAME505: SAMSUNGOR press the F key to toggle to the speed dial numberto return to System Speed Dial Numbers, step 4(above)4. Press the right soft key to return to step 2 aboveOR press TRSF to store and exit programmingOR press SPK to store and advance to the nextprogram