Samsung DCS-816 Programming Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

Contents

SAMSUNG ProgrammingDCS-816 February, 1999MMC 604 (Page 1 of 1)MMC: 604 ASSIGN STATION TO PAGE ZONEDESCRIPTION:Allows the technician to assign a keyset to any of the four internal paging zonesand all page (page plus ∗). The total number of keysets that can receive a pageis limited to 12. A keyset may be assigned to more than one zone.The assignment is controlled by the use of class marks. If a keyset is flagged as“1” in a zone column, it will receive pages for that zone. If the keyset is flaggedas “0,” it will not receive pages for that zone. Keysets can receive pages for morethan one zone.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear entryACTION DISPLAY1. Press TRSF 604Display shows ENTRY:STN :1234Q01 :NONE:000012. Enter index number (01–12, e.g., 05) via dialkeypadORPress UP or DOWN key to make selection andpress RIGHT soft key to move cursorENTRY:STN :1234 Q05 :NONE:000013. Enter station number (e.g., 205) via dial keypadORPress UP or DOWN key to make selection andpress RIGHT soft key to move cursorENTRY:STN :1234Q05 : 205 :000014. Move cursor under page zone desired bypressing UP or DOWN key and enter the digit 1under zone (e.g. zone 2)Press RIGHT soft key to return to step 2 tocontinue with entriesENTRY:STN :1234 Q05 : 205 :010015. Press TRSF to store and exitORPress SPK to store and advance to next MMCDEFAULT DATA: No stations assignedAll zone is setRELATED ITEMS: None