Samsung DCS-816 Programming Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

Contents

SAMSUNG ProgrammingDCS-816 February, 1999MMC 500 (Page 1 of 2)MMC: 500 SYSTEM–WIDE COUNTERSDESCRIPTION:Used to set the values of the system counters. The counters are listed below with abrief description of each.0 ALARM REM. CNTER The number of times that an alarm reminder will ring astation before cancelling. RANGE = 1–99.1 AUTO RDL COUNTER The number of times the system will redial an outsidenumber after the auto redial feature has beenactivated. RANGE = 1–15.2 DISA CALL CNTER Sets the maximum number of intercom calls that canbe made after accessing a DISA line. RANGE = 1–99.3 DISA LOCK CNTER Number of attempts the system will allow to incorrectlyaccess a DISA line before locking out the DISA line.RANGE = 1–99.4 NEW CALL COUNTER Number of times the system will allow a user to signalNew Call on a C.O. line during one call. RANGE =1–99.5 UCD VISUAL ALARM Used to set the Visual alarm threshold. It is triggeredwhen the number of calls waiting to be answered in theUCD group reaches this value. RANGE = 0–25.6 UCD AUDIO ALARM Used to set the Audio alarm threshold. It is triggeredwhen the number of calls waiting to be answered in theUCD group reaches this value. RANGE = 0–25.7 UCD CS LEVEL 1 Provides call wait indication level 1 if number of callswaiting to be answered in UCD group reaches thisvalue. RANGE = 0–25.8 UCD CS LEVEL 2 Provides call wait indication level 2 if number of callswaiting to be answered in UCD group reaches thisvalue. RANGE = 0–25.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPK Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALL