Samsung DCS-816 Programming Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

Contents

SAMSUNG System Administration and Special Features GuideDCS-816 February, 19993 - 23. Verify time and dateReenter if necessaryOLD: 2070798:1545NEW: MMDDYY:HHMM4. Press the right soft key to return to step 2OR press TRSF to store and exit programmingOR press SPK to store and advance to the nextprogram.If you have entered invalid data, you will receive an [INVALID ENTRY] message for threeseconds. Reenter the correct date and time. If the information you entered is incorrect,repeat the procedure.3.3 RESET STATION PASSCODES TO DEFAULTIndividual keyset users can set or change their own individual passcodes. Thesepasscodes are used to lock and unlock keysets, override toll restriction (call barring) andaccess the DISA feature. At times, it may be necessary for the system administrator toreset a station's passcode to default "1234". This program is used only to reset thepasscodes and cannot be used to display them.PROGRAM KEYSUP & DOWN Select the extension number.HOLD Press to reset the passcode.Open customer programming and follow the instructions below.OPERATION1. Press TRSF 101 [201] PASSCODEPASSCODE: QQQQ2. Dial the station number (e.g., 205)OR use the UP and DOWN keys to scroll through the[205] PASSCODEPASSCODE: QQQQkeyset numbers and press the right soft key to movethe cursor right3. Press HOLD to reset passcode [205] PASSCODEPASSCODE: 12344. Press the right soft key to return to step 2OR press TRSF to store and exit programmingOR press SPK to store and advance to the nextprogramDEFAULT DATA: ALL STATION PASSCODES = 1234