Samsung DCS-816 Programming Manual

Also see for DCS-816: Programming manual Programming manual User guide Installation manual Installation manual

Contents

SAMSUNG ProgrammingDCS-816 February, 1999MMC 203 (Pages 1 of 1)MMC: 203 ASSIGN UA DEVICEDESCRIPTION:Assigns ringing device to be accessed when a Universal Answer (UA) key ispressed or the UA pickup code is dialled. UA assignment is made in MMC 601Assign Station Group for a group and then the group is entered here. The UAdevice may be one of the device types listed below. The device type isautomatically determined by the directory number (DN) entered.DIRECTORYNUMBERDEVICE TYPE DESCRIPTION201–216 STATION The UA device is a keyset or SLT.361 ROP Ring over page.500–509 STATIONGROUPThe UA device is a station group.NOTE: Only one of the above options can be selected. If the ability to ring morethan one item (e.g., an external page zone) is required, a station groupcontaining a zone code must be created.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter DN of selected deviceSPK Used to store data and advance to next MMCHOLD Used to clear previous entryACTION DISPLAY1. Press TRSF 203Display shows current assignmentASSIGN UA PORTNONE–NO UA2. Dial DN of UA device (e.g., 205)ORASSIGN UA PORT205 –STATIONUse UP and DOWN keys to scrollthrough available devices3. Press TRSF to store and exitORPress SPK to store and advance to nextMMCDEFAULT DATA: NoneRELATED ITEMS: MMC 204 Common Bell ControlMMC 219 Common Relay Service TypeMMC 601 Assign Station GroupMMC 605 Assign External Page Zone