Panasonic WV-NP472 Operating Instructions Manual

Also see for WVNP472 - COLOR CCTV CAMERA: Brochure Reference Reference Specifications

Panasonic WV-NP472 Operating Instructions Manual Manual pdf 9 page image

-9-• Flange-back AdjustmentThe adjustment is required only when a lens withoutfocus-adjusting mechanism is mounted, or when a lenswith adjusting mechanism is mounted and focus that ismore accurate is needed.1. Loosen the flange-back fixing screw on the flange-back adjusting ring.2. Turn the flange-back adjusting ring to obtain afocused point while watching the monitor screen.3. Tighten the flange-back fixing screw softly andsecurely.Note: The object may be out of focus when using asource of near-infrared light rather than usingthe visible light.Mounting the CameraThe mounting adapter can be secured on either the topor bottom (at the factory shipment) of the camera. Themounting hole is a standard photographic pan-headscrew size (1/4”-20).• Mounting from the Bottom1. Secure the camera on the camera-mounting brack-et (locally procured), referring to the manual includ-ed with the bracket.• Mounting from the Top1. Remove the mounting adapter from the bottom ofthe camera.2. Attach the mounting adapter on top of the cameraas shown in the figure.3. Secure the camera to the camera-mounting brack-et (locally procured), referring to the manual includ-ed with the bracket.Note: Use the original two screws to attach themounting adapter on the camera. Using short-er ones may cause the camera to fall down, orlonger ones may damage the inside of thecamera.• Pictures Upside-downYou can reverse the picture upside-down in the menusetup when it is necessary.Note: The right and left of the picture are not reversed.Adapter on thebottom at thefactory shipmentCamera-mountingbracket (Locallyprocured)CP470WV -NP472NP472Fixing ScrewsMounting Adapter