Panasonic WV-NP472 Operating Instructions Manual

Also see for WVNP472 - COLOR CCTV CAMERA: Brochure Reference Reference Specifications

Panasonic WV-NP472 Operating Instructions Manual Manual pdf 7 page image

tiy ouq w erWV –NP472ALARM INALARM OUTAUX OUTDAY/NIGHT INGND A BVIDEO OUTRCVLINK10BASE-T/100BASE-TXPOWERDC 12VIN!3!4!2!1!0-7-MAJOR OPERATING CONTROLS AND THEIR FUNCTIONSSlide the panel to the left until it locks.q Auto Iris Lens ConnectorConnects the auto iris lens with a 4-pin male con-nector supplied as a standard accessory (Part No.YFE4191J100).w Flange-back Adjusting Ring & ScrewAdjusts the back focal length and picture focus.e Lens (Option)r Camera Mounting AdapterMounts the camera onto a mounting bracket.t Down Button (K)Moves the cursor downward and selects items inthe CAM SET UP menu.y Left Button (L)Moves the cursor leftward, selects the mode andadjusts some levels.u Up Button (J)Moves the cursor upward and selects items in theCAM SET UP menu.i Right Button (M)Moves the cursor rightward, selects the mode andadjusts some levels.o Set Button (I)Activates an item selected in the CAM SET UPmenu.!0 Network Port with Indicators (10BASE-T/100BASE-TX/RCV/LINK)Connects to a PC or a network via a hub with a10BASE-T/100BASE-TX cable attached RJ-45 con-nector. Indicators will light up while receiving data(RCV) or establishing communications (LINK).!1 Control TerminalsConnects respective devices.ALARM IN: Alarm sensor, ALARM OUT: Recordingdevice/alarm indicator, AUX OUT: External device,DAY/NIGHT IN: Optical sensor, GND: Signalground!2 Reset Button (A, B)The button A, along with the J and K buttons,resets the network setup parameters when youhold down these buttons for 6 seconds in thepower-on state.The button B resets the HTML files and alarm mailsetup in the same manner as the button A.Note: Never press both the reset buttons A and Bat a time.!3 Video Output Connector (VIDEO OUT)Supplies analog video signal (composite) to theconnected device.!4 Power In Terminal and Power Indicator(DC 12V IN, POWER)Connects to a DC power supply using propercables. The power indicator lights up when poweris supplied.