Panasonic WV-NP472 Operating Instructions Manual

Also see for WVNP472 - COLOR CCTV CAMERA: Brochure Reference Reference Specifications

Panasonic WV-NP472 Operating Instructions Manual Manual pdf 16 page image

-16-The following pages describe setting operations from the camera.For accessing from the PC, interpret these instructions as follows.SETTING PROCEDURESSETUP SELECTION1. Move the cursor to CAMERA or NETWORK, andpress I to open the desired setup menu.CAMERAN: Opens the CAMERA SETUP menu.NETWORKN: Opens the NETWORK SETUP menu.2. Move the cursor to END, and press I to return tocamera image screen.Note: When SETUP DISABLE appears in the bot-tom line you cannot change the currentlyactive settings. This disablement is designedto prevent accidental setting change. Refer tothe previous page to change it to ENABLE.** SET UP **CAMERANETWORKEND SET UP DISABLE↵↵CAMERA SETUP MENU1. Camera Identification (CAMERA ID) SettingYou can assign a name to the camera. The camera IDconsists of up to 16 alphanumeric characters. Thecamera ID display can be switched on and off on themonitor screen.0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ().,'":;&#!?=+-*/%$SPACEPOSI RET END RESET................Character CursorCursorCharacterAreaCommandEditingAreaCAMERA ID menu** CAM SET UP **CAMERA ID OFFALC/ELC ALCSHUTTER ---AGC ON(DNR-H)SENS UP OFFSYNC INTWHITE BAL ATW1MOTION DET OFFLENS DRIVE DCCLOCK OFFRET↵↵↵Escaping from the VMD mask setupetc.FunctionOpening the camera setup menuClosing the camera setup menuOpening a more detailed setupmenuReturning to the previous menuOpening the special menuResetting the parameter of an itemResetting all the settingsSelecting an itemSelecting a parameterValidating the selectionHold down the I button for 2 seconds.Press the I button while the cursor is atEND.Press the I button while the cursor is atan item tailed with O mark.Press the I button while the cursor is atRET.Hold down the L and M buttons simul-taneously while the cursor is at RET inCAM SETUP.Hold down the L and M buttons simul-taneously while the cursor is at the item.Hold down the L and M buttons simul-taneously while the cursor is at CAMERARESET.Press J or K.Press L and M.Press I.Hold down the I button for 2 seconds.Click the Camera Setup button in themain page to display the menu controlbuttons.Click the Menu ON button.Click the Menu OFF button.Click the ENTER button while the cursoris at the item tailed with O mark.Click the ENTER button while the cursoris at RET.Click the Reset/Special button while thecursor is at RET in CAM SETUP.Click the Reset/Special button while thecursor is at the item.Click the All Reset button while the cur-sor is at CAMERA RESET.Click the ↑ or ↓ button.Click the ← or → button.Click the ENTER button.Click the ESC button.From the Camera From the PC