Panasonic WV-NP472 Operating Instructions Manual

Also see for WVNP472 - COLOR CCTV CAMERA: Brochure Reference Reference Specifications

Panasonic WV-NP472 Operating Instructions Manual Manual pdf 41 page image

-41-Transparency: Indicates a non-masked area thathas been incorporated into the detection area.Blink: Indicates a non-masked area when the cur-sor is on it.Highlight: Indicates a masked area that has beenexempted from detection.Stripe: Indicates an area already set to maskedwhen the cursor is on it.6. Move the cursor to an area, and click ENTER.• The area will change from blinking to highlighted(masked), and then to striping.• The striping area will change to blinking (non-masked).7. Repeat step 6 until all areas are set.8. Click the ESC button to return to the ** MOTIONDETECT ** menu.9. VMD demonstration• To confirm the alarm output function, move thecursor to ALARM, and turn it to ON.• Move the cursor to DISPLAY MODEO, andclick ENTER.The demonstration starts, and the areas willblink where motion is detected.Blinking• Click ENTER to return to the ** MOTIONDETECT ** menu.10. Move the cursor to Level, and adjust the detectionlevel, moving the "I" cursor with the right or left but-ton.11. Repeat step 9 and step 10 to obtain a proper levelsetting.12. To return to ** CAM SETUP **, move the cursor toRET, and click ENTER.To return to the main page, click the Menu OFFbutton, then the Return button.■ Reviewing Alarm PicturesThe alarm pictures stored in the camera can bereviewed on the PC.1. In the main page, click the Alarm List button.2. Click the desired event in the list.The events can be stored in chronological orderfrom 1 up to 100, and the oldest event will beerased when the new one is added.The event followed by an icon contains picturefile(s).