Panasonic TX-76PW150A Operating Instructions Manual

Also see for TX-66PW150A: Operating instructions

Panasonic TX-76PW150A Operating Instructions Manual Manual pdf 7 page image

Television Control Panel Buttons7Open the front panel door to gain access to the Television Controls, push the door at the point markedwith a trianglePush again to closePRE. TV/AV - + \/ /\BUTTON WHAT IT DOESPOWERThis button is used to turn the television on and off. The Indicator light (red)will be on whenever the television is in Stand-By. The light will go out whenthe television is running or turned OFF using the power button.PRE. (Preset)The button is used to select various functions. Push the button to select thefollowing functions sequentially:SYS Select See page 21Auto Tune See page 22Manual Tune See page 23POS. Setup See page 27Geomagnetic See page 24TV / AVPressing the TV/AV button will cycle between TV, AV1, AV2, AV3, AV4,RGB and back to TV. If the RGB Skip is turned on then RGB will not beselected. Please refer to page 17.-This button is used to decrease the volume. It is also used with the PRE.button to select, change or adjust function settings.+This button is used to increase the volume. It is also used with the PRE.button to select, change or adjust function settings.\/This button is used to select the next lower programme number./\This button is used to select the next higher programme number.Note:When the television is in Stand-By it is possible to turn it back on by pressing the Programme Number UPor DOWN button.PRE.TV/AV-.+.\//\L/MONO RAUDIORGB (31.5kHz)S-VIDEO VIDEOAV2 INPRE. TV/AV