Rear Panel ConnectionsConnecting a DVD Player to the Television35Most DVD players have both a composite video and YPBPR video outputs. The YPBPR system producesa better picture and we recommend that you use this output. If your DVD player does not have YPBPRoutput, the next most desirable option is the S-Video Out terminal. Finally, if YPBPR and S-Video are notavailable, use the normal video output.DVD Connection using S-Video OutDVD Connection using YPBPR DVD Connection using Video OutThe Monitor Out terminals reproduce the signals currently on the television screen. The on-screen signalscould be a television programme or signals connected to one of the AV inputs.The Monitor Out facility can be used to allow one video source (videotape, videodisc etc.) to beconnected to more than one television. Connect the Monitor out from this television to the AV Input of thesecond television.Monitor OutIf a video recorder is connected to the Monitor Out and video sources are connected to one or more ofthe AV inputs, the television becomes a visual display for tape editing or copying.NOTE:Never connect the same video recorder or other device to both the VIDEO IN and MONITOR OUTterminals of this television as this could cause incorrect operation.WARNINGUnauthorised recording of material from Television Broadcasts or from other videoand / or audio sources may contravene copyright lawsMONITOROUTAVINPUTVCRTV used as a Monitor LVIDEOAUDIORP a n a s o n i cAV4INYYBPBPRPRPDVD OUTY-P -PB RDVDOUTAUDIOLRDVD PLAYERAV4INYBPRPAUDIODVD OUTVIDEOLRDVD PLAYERDVD PLAYER AV1 INLS - VIDEOAUDIORDVD OUT