Panasonic TX-76PW150A Operating Instructions Manual

Also see for TX-66PW150A: Operating instructions

Panasonic TX-76PW150A Operating Instructions Manual Manual pdf 25 page image

Main Menu - PresetPOS. Setup25Using the Remote Control1. Push the MAIN MENU button.2. Move to the PRESET Menu using the Up orDown button.3. Choose the PRESET Menu by using theLeft or Right buttons.4. Move to the POS Setup menu using the Upor Down button.5. Choose the POS Setup menu using the Leftor Right buttons.6. Choose the function to change using the Upor Down button.7. Adjust the setting of the function using theLeft or Right buttons.8. Push the MAIN MENU button repeatedlyuntil you return to normal viewing.Using the Front Panel Controls1. Open the front door.2. Press the PRE. until the POS.SETUPMenu is highlighted.3. Choose the POS.SETUP Menu by usingthe Volume Up (+) or Down (-) buttons.4. Choose the function to change using thePRE. button.5. Adjust the setting of the function using theVolume Up ( + ) or Down ( - ) buttons.6. Push the PRE. button repeatedly until youreturn to normal viewing.COLOUR SYSIf a clear picture with correct colours cannot be obtained, a change to the Colour System may improve thepicture. The Colour SYS is normally set to AUTO and generally does not need to be changed.Please refer to page 26.FINE TUNEIn areas of poor reception or constant interference a slight adjustment to the tuning may improve thepicture quality.Please refer to page 27.SKIPThis option allows you to “SKIP” (bypass) the unused or undesired Programme Numbers. The Function isonly applicable when the Programme Number Up or down buttons are pressed. The use of the remotecontrol Direct Programme Number buttons overrides the Skip function.Please refer to page 27.AVLThe AVL function is used to prevent sudden increases in volume such as explosions etc. in movies. Youcan adjust the volume to a level where you can hear whispers on the television and all other sounds areat the same volume level. This feature is very useful when watching late at night and you do not want todisturb anyone else in the house.Use the or Right buttons to switch the AVL On or Off.CH COLOUR SETColour density can vary between broadcast channels. These variations can be compensated for byadjusting the CH COLOUR SET. You can adjust the colour density for each channel received. Use theLeft or Right buttons to choose the best option from three settings.POS. SETUPFINE TUNESKIPAVLCH COLOUR SETCOLOUR SYS AUTOACCESSOFFON-----------|-----------