Panasonic TX-76PW150A Operating Instructions Manual

Also see for TX-66PW150A: Operating instructions

Panasonic TX-76PW150A Operating Instructions Manual Manual pdf 20 page image

Features Menu – Wake Up Timer20The television can be programmed to turn itself ON after a period of time.1. Push the MAIN MENU button.2. Move to the FEATURES Menu using the Up orDown button.3. Choose the FEATURES Menu by using the Leftor Right buttons.4. Move to the WAKE UP TIMER function usingthe Up or Down button.5. Press the Left or Right buttons to set the timedelay.6. The Left button will decrease the time by tenminutes each time you press it. The Rightbutton will increase the time by ten minuteseach time you press it.7. After setting the Wake Up Timer, switch the television to Stand-By. The power indicator will blink ifthe Wake Up Timer has been set correctly.8. When the Wake Up time has elapsed, the television will turn ON.9. The Off-Timer will be set to 90 minutes. “WAKE UP TIMER” and the Off-Timer will be displayed atthe top of the screen. (Press any button to cancel the display).Notes:1. The wake up timer can be set for up to 12 hours.2. When the Wake Up Timer turns the set on, the Off-Timer will automatically switch it off again after90 minutes, unless it is cancelled. Press any button to cancel the Off-Timer.3. The Wake Up Timer can be cancelled by:~ switching the main power off, or~ setting the timer to OFF using the Left and Right buttons, or~ pressing the Normalise button while the wake up timer On-Screen display is showing.Features Menu – SCAN MODEThis feature lets you change the screen refresh method.1. Push the MAIN MENU button.2. Move to the FEATURES Menu using the Up orDown button.3. Choose the FEATURES Menu by using the Leftor Right buttons.4. Move to the SCAN MODE function using the Upor Down button.5. Press the Left or Right buttons to set the mode.6. You can change between AUTO, 100Hz, andPROGRESSIVE.7. This change can also be carried out using the100Hz/PROGRE button on the remote control.Notes:We recommend that you set Scan Mode to Progressive when viewing NTSC transmission.When viewing a PAL transmission (other than PAL 60) with Scan Mode set to Progressive, the screen willflicker, this is not a fault.When viewing a TV program with moving characters, to avoid "shaking / jagged" effect, the best choice isto select a progressive scan.EXITACCESSSELECTEXITACCESSSELECT