Main Menu – PresetGEOMAGNETIC24All televisions, particularly large screen televisions, are affected by the earth’s Magnetic Field. The symptom mayshow up as blurring of colours or strange discoloured patches. The location and direction of the television can addto the interference problem.The Geomagnetic Correction option can be used to overcome some of these effects.Geomagnetic Correction Using Front Panel Controls1. Open the front panel door.2. Push the PRE. button until GEOMAGNETIC is highlighted.3. Use the front panel Volume Up ( + ) or Down ( - ) buttons to adjust for best picture. Pay specialattention to the four corners of the picture. The Geomagnetic Correction has a range of -8 to +8.4. Push the PRE. button repeatedly until you return to normal viewing.Geomagnetic Correction Using the Remote Control1. Push the MAIN MENU button.2. Move to the PRESET Menu using the Up or Downbutton.3. Choose the PRESET Menu by using the Left orRight buttons.4. Push the Up or Down button to access theGEOMAGNETIC option.5. Use the Remote Control Programme Left or Rightbutton to adjust the picture for best colour. Payspecial attention to the four corners of the picture.The Geomagnetic Correction has a range of -8 to+8.6. Push the MAIN MENU button repeatedly until youreturn to normal viewing.Special Note1. If the adjustment still allows coloured patches on the screen, turn the mains power off for about 30minutes.2. In some cases the geomagnetic adjustment will not completely eliminate the interference. In thissituation it will be necessary to relocate the television.PRESETSYS SELECTAUTO TUNEMANUAL TUNEPOS SETUPGEOMAGNETICAUSTRALIAACCESSACCESSACCESS-------|--------