Television Remote Control Buttons10100Hz / ProgressiveThis button allows you to change the Picture refresh setting between AUTO,100Hz MODE and PROGRESSIVE.StandbyThe remote control button is used to turn the television into Standby mode.When the television is in Stand-By it is possible to turn it back on by pressingthis remote control Power button, the Programme Number UP or DOWNbutton (front panel or remote control) or any of the direct Programme Numberbuttons.Direct Programme Number SelectionSingle Digit Programme Numbers (0 to 9) can be accessed directly bypressing the corresponding number on the Remote Control Transmitter.RECALLThis button operates in three stages.Stage 1 - Pressing this button will display all current active functions. Thefunctions that can be displayed include Stereo or Mono, ScanSetting, Aspect Ratio, AV Number, Programme Number, SoundOption, Picture Option, and Off-Timer setting. After about 2seconds it automatically switches to stage 2.Stage 2 - Pressing the button again displays the Programme Number orthe AV Number and the Off-Timer setting.Stage 3 - Pressing for the third time cancels the recall function andremoves the text being displayed on the screen.SURROUNDSurround sound is designed to recreate the spatial effect of a movie theatre orconcert hall. It brings added depth to the sound from your television.Pressing this button switches between OFF, VIRTUAL and SPATIAL. Pleaserefer to page 16ASPECTThis button is used to move through the different aspect ratios. The Aspectratios available are AUTO, 16:9, 14:9, JUST, 4:3, ZOOM1 and ZOOM 2.Please refer to page 28.R – TUNE (Rapid Tune)This button is used to swap between the channel you are now watching andthe last channel you were watching. This function does not work with AV.FAVORITEThis button allows you to access your favourite channels. Please refer to page19 for more information.0 ~ 9FAVORITER-TUNE100Hz/PROGREASPECTSURROUND