4.3 CONNECTING THE VPS WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD61286 Installation Manual4.3 CONNECTING THE VPS WITH THEPANASONIC KX-TD816, KX-TD1232 ANDKX-TD612Notes• Do not use System Programmes [106], [131], [602] or [813] for DPT Integration.• The next 2 sections (4.3.1 KX-TD1232 Software Verification and Programming for DPTIntegration via the Manager’s Extension and 4.3.2 KX-TD1232 Software Verificationand Programming for DPT Integration via the Operating and Maintenance Tool) are forthe KX-TD1232 as examples. Please refer to them for the KX-TD816 and the KX-TD612.4.3.1 KX-TD1232 Software Verification and Programming forDPT Integration via the Manager’s ExtensionIt is important that the KX-TD1232 has the proper software level to allow DPT Integration withthe VPS. Follow the procedures below to confirm the software level, then complete therequired programming before starting up the VPS.NoteTwo methods of programming are available on the KX-TD1232. The instructionsbelow show how to program without the operating and maintenance tool. Forinstructions on programming with the operating and maintenance tool, please see4.3.2 KX-TD1232 Software Verification and Programming for DPT Integration via theOperating and Maintenance Tool.All of the following procedures must be done after entering system programming. Referto the KX-TD1232 Programming Guide or Installation Manual for instructions on how toenter the system programming mode.Software Verification1. Verify Software–If you are configuring a 2-cabinet system, remember to check bothcabinets. The software must be the same in each. Check the software version of the KX-TD1232 using System Programme [116].Example: P111GYMMDDAThe underlined digits represent the software production date code (year, month, day).If the software version of the PBX is old, you may not be able to utilise some of thefeatures available only with DPT Integration. For more information, consult yourdealer.From the SYS-PGM NO ? screen:a) Enter [116].b) Press the NEXT button (SP-PHONE).
