C3 SETTING COS (CLASS OF SERVICE) PARAMETERS282 Installation ManualPlay Personal Greeting for Caller IDCaller ID ScreeningMessage Notification22. a) The current setting plays. Press [1] to change the setting (enable or disable).b) Confirm the entry is correct and Press [2] to accept it.23. a) The current setting plays. Press [1] to change the setting (enable or disable).b) Confirm the entry is correct and Press [2] to accept it.24. a) The current setting plays. Press [1] to change the setting (enable or disable). If theMessage Notification is enabled, go to Step 24b below.b) Press [1], [2], [3], [4], or [5] to choose the desired Beeper Callback Number EntryMode.• [1] Caller Select Mode• [2] Without message mode• [3] Before message recording mode• [4] After message recording mode• [5] Disable All Entry Mode (Caller cannot access beeper [pager])c) Confirm the entry is correct and Press [6] to accept it.d) The current setting of MWL Notification for Unreceived Message plays. Press [1]to change the setting (enable or disable).e) Confirm the entry is correct and Press [2] to accept it.f) The current setting of Device Notification for Unreceived Message plays. Press [1]to change the setting (enable or disable).g) Confirm the entry is correct and Press [2] to accept it. Return to Step 24a above.
