4.4 COMMON DPT INTEGRATION FEATURES AND SETUP PROCEDURESInstallation Manual 1016. To exit the Station Programming mode, Press the PROGRAM button or lift the handset.7. Repeat these steps for each telephone.4.4.11 Voice Mail Transfer Button Assignment via StationProgrammingThis feature allows an extension user to transfer calls directly to a Voice Mailbox. This isavailable with both DPT and Inband Integrations.PC programming is also possible.1. Enter PITS Programming:a. With the phone on-hook, Press the PROGRAM button.b. Dial [99]. (Display changes to PT-PGM Mode.)2. Press the desired Flexible (CO or DSS/BLF) key that you want to assign as the VTRbutton.3. Dial [82] or [8].Screen output: VTR4. Dial the Voice Mail extension number.Screen output: VTR- _ _ _(_ _ _ = The extension number you entered).5. Press STORE.6. To exit the Station Programming mode, Press the PROGRAM button or lift the handset.7. Repeat these steps for each telephone.4.4.12 Button Assignment via PC ProgrammingThe KX-TD500 users can assign buttons via PC programming. Follow the procedure below toassign each button.NoteThe KX-TD500 is not sold in the United Kingdom. It is only available in somecountries.1. Go to "4-2 Extension Line 1/2" screen (refer to the screen image in 4.4.6 Live CallScreening Assignment via PC Programming).2. Select the "Card No." and "Port No." which you are going to program.3. Click "CO Key" in the upper right corner. "Flexible CO Key" screen (for all CO Keys)displays.Conditions: This button must be a CO or DSS/BLF key to beprogrammed as a TWT button. When all Voice Mailports are busy and this key is pressed, the user willhear reorder tone.Conditions: This button must be a CO or DSS/BLF key to beprogrammed as a VTR button. When all Voice Mailports are busy and this key is pressed, the user willhear reorder tone.
