6.3 BACKING UP THE SYSTEMInstallation Manual 1436.3 BACKING UP THE SYSTEM1. Choose the Utility Command. Type [SAVE], then Press ENTER. See screen outputbelow.From System Administration Top Menu:2. To start, Press [2] and then ENTER.3. Press RETURN or ENTER.Following steps are for HyperTerminal as an example.4. Select Receive File from the Transfer Menu.5. Specify a folder where data is to be saved (if necessary, use "Browse").6. Select Xmodem as the protocol to save data.7. Click "Receive".8. Enter desired filename and click "OK".The file transfer screen appears and shows download progress. Download time will varydepending on the communication speed and file sizes."SAVE Completed" will appear on the screen when the file has been saved. Continuesaving the other items as needed. It is not necessary to save the "Program" or "SystemPrompts" because they are resident on the hard drive and cannot be altered. We dorecommend all other data be saved including User Prompt 1 and User Prompt 2 (if theyhave been recorded).NotesRecorded caller names for the Caller Name Announcement (System/Personal)cannot be saved by the above procedure, only Caller ID numbers can be saved.Enter The Number : = 3Utility Command$ SAVEVPS DISK Data Save ( VPS -> PC : Xmodem )1: Program2: Parameters3: System Prompts4: User Prompts-15: User Prompts-26: Custom Service Menus7: Personal Greetings8: Company GreetingsSelect No. : = 2
