2.5 INSTALLATION STEPSInstallation Manual 372.5 INSTALLATION STEPSThe following is an overview of the standard installation process using DPT Integration. Whennecessary, other sections in this manual have been referenced for more detailed descriptionsor instructions.1. Obtain a list of current users, their extension numbers, their departments, and the type ofsystems they use (mailbox, no mailbox, beeper [pager], car phone, etc.).2. Assess your customers’ needs before setting up the system. You will save yourself timelater by giving customers what they need up front. Ask the office manager how the VPS willbe used. Give examples.Recommend that your customer use a word processor to log the greetings. You will findthese files much more easily than the worksheet pages if you need to make changes downthe road.3. Connect the power cord to the VPS, then turn the power switch on.CAUTIONThe power supply cord is used as the main disconnect device. Ensure that thesocket-outlet is located/installed near the equipment and is easily accessible.4. Install optional port expansion cards (see 2.6 INSTALLING PORT EXPANSION CARDS:KX-TVP102 OR KX-TVP204).5. Standard Initialisation (For DPT Integration Connection)a) Program the ports of the PBX for voice processing (see Section 4 INTEGRATING THEVPS WITH THE PANASONIC KX-TD DIGITAL PBX).Program the KX-TD500, the KX-TD1232, the KX-TD816 or the KX-TD612 for VoiceMail integration.• KX-TD500, KX-TD816, KX-TD1232, KX-TD612NoteThe KX-TD500 is not sold in the United Kingdom. It is only available in somecountries.Programming may be performed on-site or at the office.All memory is stored and will be retained when the unit is powered up as longas the Rotary Switch has been reset to position [0] prior to turning the unit off.b) Turn the power switch off at the VPS.c) Plug extension wire(s) from the PBX into VPS (see 2.7 CONNECTIONS).d) Connect the personal computer to the VPS with a Null Modem Cable (see 2.8.2Connecting the RS-232C Cable).e) Set the Rotary Switch to position 5.f) Turn the power switch back on at the VPS.g) Wait until the "warning" appears on the screen.h) Set the Rotary Switch back to position 0.
