Panasonic KX-TDA30 Features Manual

Also see for HYBRID IP-PBX KX-TDA100: User guide User guide Technical information Technical information Features guide

Contents

Panasonic KX-TDA30 Features Manual Manual pdf 88 page image

1.5 Making Call Features88 Feature Guide1.5.4.7 Pause InsertionDescriptionPressing a PAUSE button inserts a preprogrammed Pause time between digits of a user-dialled numberbefore the number is dialled out, allowing certain numbers separated with a pause to be used to accesscertain features (e.g., access codes, seizing idles lines, etc.).When a pause is needed, pauses must be inserted manually (pressing the PAUSE button) in all cases,except for the following access codes where a pause is automatically inserted between the user-dialledaccess code and the subsequent digits:a) Host PBX Access code (→ 1.5.4.8 Host PBX Access Code (Access Code to the TelephoneCompany from a Host PBX))b) Special Carrier Access code (→ 1.5.4.9 Special Carrier Access Code)c) Second Dial Tone Waiting codeConditions• The Pause time is programmable for each trunk.• Pauses can be stored in Memory Dialling.• When a Second Dial Tone Waiting code is dialled after seizing a trunk, a preprogrammed number ofpauses are inserted after the code.• ARSA pause is not automatically inserted between the user-dialled access code and the subsequent digitswhen the ARS mode is enabled. (1.9.1 Automatic Route Selection (ARS))PT Programming Manual References[416] LCOT Pause Time