2.2 System Configuration—SoftwareFeature Guide 3512.2.4 Time ServiceDescriptionThis PBX supports day, night, lunch, and break modes of operation. TRS/Barring can be arrangedseparately. The destination of incoming calls can be set differently for each mode.1. Time Service Switching ModeDay/lunch/break/night mode can be switched either automatically or manually. The switching mode canbe assigned for each tenant.The switching mode can also be changed by pressing the Time Service Switching Mode (Automatic/Manual) button. This can be performed by only an extension assigned as the manager, orpreprogrammed extension on a COS basis.Even while in the Automatic Switching mode, day/lunch/break/night mode can be changed manually.2. Time TableEach tenant has a Time Table used for the Automatic Switching mode. The Start and/or End time ofeach mode can be set for each day of the week. The Time Table numbers correspond to the tenantnumbers respectively.Type DescriptionAutomatic The PBX will switch mode according to the preprogrammed TimeTable.Manual A manager, or preprogrammed extension on a COS basis can switchmode by dialling the feature number or pressing the Time Servicebutton.