2.2 System Configuration—Software348 Feature Guide2.2.3 Tenant ServiceDescriptionThis PBX can be shared with a certain number of tenants.1. Tenant Configuration1.1 Tenant MemberThe tenant members consist of extension user groups. One extension user group can belong toonly one tenant. Therefore, one extension can belong to only one tenant.(→ 2.2.2 Group)1.2 Time ServiceEach tenant has a Time Table. The Start and/or End time of each time mode (day/lunch/break/night) can be set for each day of the week. The Time Table numbers correspond to the tenantnumbers respectively.(→ 2.2.4 Time Service)[Example]2. System ManagementEach of the following system management items can be assigned to each tenant.a) Tenant Operator (extension number/floating extension number of incoming call distributiongroup/none) (→ 2.2.5 Operator Features)b) ARS Mode (Off/Local Access/All Access/System) (→ 1.9.1 Automatic Route Selection (ARS))c) Music Source for Music on Hold (System/BGM Number/Cyclic Tone)(→ 1.12.4 Music on Hold)d) System Speed Dialling (System/Extended for KX-TDA30 or System/Tenant Exclusive for KX-TDA100/KX-TDA200/KX-TDA600)(→ 1.6.1.5 Speed Dialling—Personal/System)Hardware Requirement: An EMEC or MEC card[Programming Example]Tenant No. Operator ARS Mode Music Source System SpeedDialling1 Extn.101 Local Access System*3 System*42 None *1 System*2 Cyclic Tone Extended/Tenant ExclusiveTenant 1Use Time Table 1ExtensionUser Group 1ExtensionUser Group 2ExtensionUser Group 3ExtensionUser Group 4Tenant 2Use Time Table 2ExtensionUser Group 5ExtensionUser Group 6
