1.1 Incoming Call Features30 Feature Guide1.1.1.6 Intercept RoutingDescriptionProvides automatic redirection of incoming trunk calls. There are two types of Intercept Routing as follows:The intercept destinations used are as follows:Feature DescriptionIntercept Routing—No Answer(IRNA)If a called party does not answer a call within a preprogrammed timeperiod (Intercept time), the call is redirected to the preprogrammeddestination.Intercept Routing—Busy/DND If a called party is busy or in DND mode, the call is redirected to thepreprogrammed destination.Type 1: The assigned intercept destination of the extension port.→ [604] Extension Intercept DestinationType 2: The assigned intercept destination of the trunk group that received the call.→ [470] Trunk Group Intercept DestinationOriginal Destination Intercept DestinationWired Extension (PT/SLT/ISDNExtension/T1-OPX)Type 1PS Type 1Incoming Call Distribution Group Intercept Routing—Overflow for the Incoming Call DistributionGroup is used (→ 1.2.2.6 Overflow Feature). The call isredirected to the overflow destination assigned for the incomingcall distribution group.→ [625] Destination for Overflow Time ExpirationPS Ring Group Type 2Floating Extension no. for SVM Not availableVM Group (DTMF/DPT) Type 2External Pager (TAFAS) Type 2DISA Type 2*Analogue/ISDN Remote Maintenance Not availableIdle Line Access no. + Phone no. Not availableTrunk Group Access no. + Trunk Groupno. + Phone no.Not availableOther PBX Extension (TIE with no PBXCode)Not availableOther PBX Extension (TIE with PBXCode)Not available
