1.28 Audible Tone Features282 Feature Guide1.28.2 Confirmation ToneDescriptionAt the end of feature operations, the PBX confirms the success of the operation by sending a confirmationtone to extension users.Conditions• Confirmation Tone PatternsAll confirmation tone patterns have a default (→ 3.3.1 Tones/Ring Tones).• It is possible to eliminate each tone.Type DescriptionTone 1 a) Sent when the setting is accepted.b) Sent when a call is received in voice-calling mode (AlternateReceiving—Ring/Voice). The caller's voice will be heard after thetone.c) Sent when making a call to a doorphone.Tone 2 a) Sent from an external paging device or an extension before beingpaged.b) Sent when a call is received in Hands-free Answerback mode.Tone 3-1 a) Sent before a conversation is established when using the Pagingfeature.b) Sent when a conversation is established with the extension in thefollowing modes after the call making operation:• Hands-free Answerback mode• Voice-calling mode (Alternate Receiving—Ring/Voice)c) Sent when making a call from a doorphone.Tone 3-2 Sent just before a conversation is established when accessing thefollowing features by the feature numbers:• Call Park Retrieve• Call Pickup• Hold Retrieve• Paging Answer• TAFASTone 4-1 Sent when moving from a two-party call to a three-party call. (e.g.,Executive Busy Override, Conference, Privacy Release, Two-wayRecord.)Tone 4-2 Sent when moving from a three-party call to a two-party call. (e.g.,Executive Busy Override, Conference, Privacy Release, Two-wayRecord.)Tone 5 Sent when a call is placed on hold (including Consultation Hold).
