1.6 Memory Dialling FeaturesFeature Guide 1011.6.1.4 Last Number RedialDescriptionEvery extension automatically saves recently dialled external telephone numbers to allow the same numberto be dialled again easily.Automatic Redial:If Last Number Redial is performed in hands-free mode and the called party is busy, redialling will beautomatically retried a preprogrammed number of times at preprogrammed intervals. The Redial Call No-answer Ring Duration time is programmable.This feature is available only on certain PT models which have the SP-PHONE button.Outgoing Call Log:Information on outgoing trunk calls is automatically logged at each extension. Users of display PTs can viewdetails of a preset number of recently dialled telephone numbers, and easily call the same outside partyagain.Conditions• If a new number is dialled when the Outgoing Call Log is full and/or Automatic Redial contains anumber, the data of the oldest stored call will be deleted, and the new number will be stored.• If any dialling operations are performed or an incoming call is answered during Automatic Redial,Automatic Redial is cancelled.• Automatic Redial is not available for some countries/areas when using an analogue trunk.• Interrupt RedialWhen an outside party or seized trunk is busy, a user can attempt to redial the number by pressing theREDIAL button without going on-hook. This can be performed several times without having to go on-hook.• Outgoing Call Log Display by REDIAL ButtonPressing the REDIAL button on a display PT while on-hook can display the Outgoing Call Log. Systemprogramming is required for this operation.• If the Outgoing Call Log is used to redial an outside party, or a number already stored in the OutgoingCall Log is manually redialled again, the number will be stored in the call log multiple times. However,calls made using the REDIAL button are not stored in the Outgoing Call Log again.• It is possible to change the number of records that can be stored at each extension through systemprogramming.PT Programming Manual References[205] Automatic Redial Repeat Times[206] Automatic Redial IntervalFeature Guide References3.1 Capacity of System ResourcesUser Manual References1.2.3 Redial1.12.1 Using the Call Log
