7EnglishSafety PrecautionsWARNING■ SetupThis LCD Display is for use only with the followingoptional accessories.Use with any other type of optional accessories maycause instability which could result in the possibilityof injury.(All of the following accessories are manufactured byPanasonic Corporation.)• Installation MountTY-VK55LV1• Cover-frame KitTY-CF55VW50• Early Warning SoftwareET-SWA100 series*1• Video Wall ManagerTY-VUK10*2*1: Suffix of the part number may differ depending onthe license type.*2: Supports Ver1.1 or later.Note● The part number of the optional accessories aresubject to change without notice.We are not responsible for any product damage, etc.caused by failures in the installation environment evenduring the warranty period.Always be sure to ask a qualified technician to carry outset-up.Small parts can present choking hazard if accidentallyswallowed. Keep small parts away from young children.Discard unneeded small parts and other objects,including packaging materials and plastic bags/sheets toprevent them from being played with by young children,creating the potential risk of suffocation.Do not place the Display on sloped or unstablesurfaces, and ensure that the Display does not hangover the edge of the base.• The Display may fall off or tip over.Install this unit at a location with minimal vibrationand which can support the weight of the unit.• Dropping or falling of the unit may cause injury ormalfunction.Do not place any objects on top of the Display.• If foreign objects or water get inside the Display, ashort-circuit may occur which could result in fire orelectric shock. If any foreign objects get inside theDisplay, please consult your local Panasonic dealer.Transport only in upright position!• Transporting the unit with its display panel facingupright or downward may cause damage to theinternal circuitry.Ventilation should not be impeded by coveringthe ventilation openings with items such asnewspapers, table cloths and curtains.For sufficient ventilation, see page 10.Caution - For use only with UL Listed Wall MountBracket with minimum weight/load 30.0 kg (66.1 lbs).When installing the Display vertically, rotateclockwise and be sure that the Power Indicatorcomes to the downside.(The Power Indicator is situated at the back.)90Heat is generated and it may cause fire or damage tothe Display.Installation should be performed by installationprofessionals.Installing the Display incorrectly may lead to an accidentthat results in death or serious injury.• Specified Installation Mount (Optional) or a mountingbracket that conform to VESA standards (VESA 400 ×400) must be used. (see page 10)• If you terminate the use of the Display, askprofessionals to remove the Display as soon aspossible.When mounting the Display on the wall, prevent themounting screws and power cable from contactingmetal objects inside the wall.An electric shock may occur if they contact metal objectsinside the wall.Do not install the product to a place where theproduct is exposed to direct sunlight.• If the screen is exposed to direct sunlight, the liquidcrystal panel may have adverse effect.■ When using the LCD DisplayThe Display is designed to operate on 110 - 127 or220 - 240 V AC, 50/60 Hz.Do not cover the ventilation holes.• Doing so may cause the Display to overheat, whichcan cause fire or damage to the Display.Do not stick any foreign objects into the Display.• Do not insert any metal or flammable objects into theventilations holes or drop them onto the Display, asdoing so can cause fire or electric shock.