81English■ User modeA user can change password only.1234Current password input fieldNew password input fieldNew password input field (re-enter for confirmation)Button for executing password changeNote● Up to 16 alphanumeric characters can be used for apassword.● When changing the administrator account, both“Current user name” and “Current password” arerequired.Network config pageWhen connecting by logging in with administerprivileges, you can make detailed settings for networkrelated to display.■ LAN settings1 Click [Detailed set up] in the menu.2 Click [Next].The settings window appears, showing the currentsettings.• To change the LAN settings, click [Change].• To return to the previous window, click [Back].3 Complete the detailed settings andclick [Next].Setting contents here are the same as the addressinformation contents set for the [LAN setup] menu ofthe Display.After all required items have been entered, click[Next]. Then, a confirmation window appears.4 Click [Submit].The settings will be registered.Note● Changing the setting of LAN while connected withLAN might disconnect the connection.Adjust clock pageClick [Detailed set up], then [Adjust clock] to display theAdjust clock page.New date fieldNew time fieldButton to update time and date settingsNote● Date and time is displayed as [- -] when they are notset.● When [Network control] is set to [On] and it is instandby mode, date and time display will be blankand they cannot be set.● If the time becomes incorrect immediately aftersetting the correct time, contact the dealer where youbought the Display.