85EnglishUSB Media PlayerFunction descriptionThe USB media player displays still pictures andmotion pictures saved in a USB memory by insertingthe USB memory device into the display unit.Note● To use this function, set [USB media player] to[Enable] in [Setup] - [USB media player settings]. (seepage 60)Single Media PlayerFiles are played by a single unit.USBmemoryMulti Media PlayerConnecting more than one unit using LAN cables playsback files in the USB memory simultaneously.One of the multiple units becomes the master, and theothers are slaves. The two-unit configuration example isshown below.For LAN connection, see “Network environment (MultiMedia Player only)” (see page 89).USBmemoryMaster SlaveUSBmemoryHub or broadband routerNote● For Multi Media Player, one USB memory device isrequired for one unit.● Pictures in the USB memory cannot be displayedvia a daisy chain connection with the DVI-D IN/OUTterminal.Preparation■ Supported device● Commercially available USB memory devices aresupported. (Those with security functions are notsupported.)● USB memory devices other than those formatted inFAT16 or FAT32 cannot be used.● Up to 32 GB of USB memory in size are supported.● Only single partition configuration is supported.■ PreparationPrepare the following files in the USB memory for themedia player.● Play file● Scenario (as necessary)● File list (as necessary)■ Play fileThe unit’s Media Player supports the formats below.File name (Extension)Still image JPG, JPEG, JPEMoving image AVI, MKV, ASF, WMV, TS, MTS,MP4, 3GP, MOV, FLV, F4VCodecMoving imageCodec Maximum resolutionMPEG4VISUAL 480@30fpsMPEG4AVC 1080@30fps, High ProfileVC-1 Advanced 1080@30fpsVC-1 Simple &Main 1080@30fpsAudioCodec Sampling frequency(kHz)Bit rate(kbps)MP3 8/11.025/12/16/22.05/24/32/44.1/48 8-320AAC 8/11.025/12/16/22.05/24/32/44.1/48 1-1728WMA StandardWMA 9WMA 10 Pro8/11.025/12/16/22.05/24/32/44.1/48 1-1728Still imageCodec Maximum resolutionJPEG 4096×4096