67EnglishNote● When [Input search] is not set to [Off], this menu willbe greyed out and cannot be set. (see page 64)Recall displayPressing displays any of the followings.● When the main input is being used for viewing andthe operating conditions for the Backup Input functionare met.HDMI116:9Backup mode OK● When the backup input, enabled by the operation ofthe Backup Input function, is being used for viewing.HDMI116:9Primary backup inputWhen the conditions for the Backup Input functionare met, the following screen is displayed.Backup mode OKAudio input selectSet up the sound when a video input is selected.1 Select the video input with .Set the audio input with .HDMI1HDMI2DVI-DPCCOMPONENTVIDEO AUDIO2 INAUDIO2 INAUDIO1 INAUDIO1 INHDMI2HDMI1Audio input select● The illustration above shows the factory settings.Video input Audio inputHDMI1 HDMI1 / AUDIO1 IN /AUDIO2 IN / No audioHDMI2 HDMI2 / AUDIO1 IN /AUDIO2 IN / No audioDVI-D / PC /COMPONENT* /VIDEOAUDIO1 IN / AUDIO2 IN /No audioNo audio: No audio input (Mute)*: [COMPONENT] may be displayed as [RGB]depending on the settings of [Component/RGB-inselect]. (see page 47)When the setting for the audio input has beenchanged from the factory settings, the audio input isdisplayed as below.HDMI116:9AUDIO1 INOnscreen displaySet to display / hide the following Onscreen display.● Power on display● Input signal switch display● No signal display● MUTE display after displaying the menu screen● Off timer remaining time display when 3 minutesremaining[On]:Displays the Onscreen display.[Off]:Hides the Onscreen display.