Panasonic H-55LFV60U Operating Instructions Manual

Contents

Panasonic H-55LFV60U Operating Instructions Manual Manual pdf 53 page image

53EnglishColour matching functionCorrects unevenness of colours among multiplescreens. R (red), G (green), B (blue) and intermediatecolours (cyan, magenta and yellow) are correctedindividually on each display.Note● When displaying still picture with USB input (USBmedia player), it does not have an effect on thepicture.[Colour matching function] - submenu screen204800Colour matching functionSelect colour RedOffTestpatternGreenBlueResetRed[Select colour]Select the colour to correct with .[Testpattern][On]:Displays the test pattern of the selected colour.(The sound is muted.)[Off]:Displays the normal input signals.[Red]Finely adjusts the intensity of red component.0 to 1023 or 1024 to 2048[Green]Finely adjusts the intensity of green component.0 to 1023 or 1024 to 2048[Blue]Finely adjusts the intensity of blue component.0 to 1023 or 1024 to 2048[Reset]Restores each adjustment of all colour selectionsto default.Select [Yes] with and press .■ To restore each adjustment of the selectedcolour to defaultPress while the menu is displayed, theneach adjustment of the selected colour is restored todefault.Screensaver(For preventing image retention)Do not display a still picture, especially in 4:3 mode, forany length of time.If the display must remain on, a Screensaver should beused.ScreensaverStart10:00Mode OffTHURSDAY2015/01/01■ Screensaver settingsScreensaver operationWhen the Screensaver is operating, the following 5patterns are displayed full screen for 5 seconds each,and it will be repeated.Black → Dark grey → Grey → Light grey → White →Light grey → Grey → Dark greyTo start Screensaver nowSelect [On] in [Mode].Select [Start] and press .● The menu screen will disappear and theScreensaver will be activated.ScreensaverStart10:00Mode OnTHURSDAY2015/01/01Note● If the following buttons are pressed while the screensaver is operating, the screen saver is cancelled.Remote control: Main unit: <+ (Unit)><- (Unit)> ● When the display is turned off, the Screensaver willbe deactivated.To set interval of ScreensaverSelect [Interval] in [Mode].Set [Periodic time].● Press to change the time by 15 minutes.● In [ENGLISH(US)] OSD language, [Periodic time]is displayed as [SHOW DURATION].Set [Operating time].● Press once to change the time by 1 minute.Keep pressing down to change the time by 15minutes.● In [ENGLISH(US)] OSD language, [Operatingtime] is displayed as [SAVER DURATION].