|
English8Do not remove the cover or modify it in any way.• High voltages which can cause severe electric shocksare present inside the Display. For any inspection,adjustment and repair work, please contact your localPanasonic dealer.Ensure that the mains plug is easily accessible.The mains plug shall be connected to a mainssocket outlet with a protective earthing connection.Do not use any power supply cord other than thatprovided with this unit.• Doing so may cause short-circuit, generates heat,etc., which could cause electric shock or fire.Do not use the supplied power supply cord with anyother devices.• Doing so could cause electric shock or fire.Securely insert the power supply plug as far as itwill go.• If the plug is not fully inserted, heat may be generatedwhich could cause fire. If the plug is damaged or thewall socket is loose, they shall not be used.Do not handle the power supply plug with wethands.• Doing so may cause electric shocks.Do not do anything that may damage the powercable. When disconnecting the power cable, pull onthe plug body, not the cable.• Do not damage the cable, make any modificationsto it, place heavy objects on top of it, heat it, place itnear any hot objects, twist it, bend it excessively orpull it. To do so may cause fire and electric shock. Ifthe power cable is damaged, have it repaired at yourlocal Panasonic dealer.Do not remove covers and NEVER modify theDisplay yourself• Do not remove the rear cover as live parts areaccessible when it is removed. There are no userserviceable parts inside. (High-voltage componentsmay cause serious electrical shock.)• Have the Display checked, adjusted, or repaired atyour local Panasonic dealer.Keep the supplied AAA/R03/UM4 batteries out ofreach of children. If accidentally swallowed, it will beharmful to the body.• Please contact a doctor immediately in case youdoubt that the child may have swallowed it.If the Display is not going to be used for anyprolonged length of time:• Unplug the power supply plug from the wall outlet.• The power consumption is 0 W when the poweris turned off with the on thedisplay. However, the power consumption is 0.5 Wwhen the power is turned off with the remote controlor . (see page 27)Picture noise may occur if you connect / disconnectthe connection cables of the input terminals youare currently not watching, or if you turn the powerof the video equipment on / off, but it is not amalfunction.To prevent the spread of fire, keepcandles or other open flames away fromthis product at all times.
PreviousNext |