Panasonic H-55LFV60U Operating Instructions Manual

Contents

Panasonic H-55LFV60U Operating Instructions Manual Manual pdf 66 page image

English66● When the backup input, enabled by the operation ofthe Backup Input function, is being used for viewing.HDMI116:9Backup InputDVIWhen the conditions for the Backup Input functionare met, the following screen is displayed.Main inputBackup OK■ Backup input (Normal)Switches to the backup input if an interruption ofvideo occurs.Note● When an analogue (PC, COMPONENT or VIDEO)input is being used for viewing, you cannot set ananalogue (PC, COMPONENT or VIDEO) input as abackup input.● Any analogue (PC, COMPONENT or VIDEO)input cannot be set as [Primary backup input] or[Secondary backup input].● This function will start operating once a video signal isdetected by both the input in use for viewing and thebackup input and the [Backup input change] item isdisplayed as [Active].[Primary backup input]Sets the first priority backup input.(None) / [HDMI1] / [HDMI2] / [DVI-D] / [PC] /[COMPONENT]* / [VIDEO] / [USB]The input that is of the same type as the one in usefor viewing will be greyed out.When an analogue (PC, COMPONENT or VIDEO)input is being used for viewing, you cannot set ananalogue (PC, COMPONENT or VIDEO) input as abackup input.Any analogue (PC, COMPONENT or VIDEO)input cannot be set as [Primary backup input] or[Secondary backup input].[Secondary backup input]Sets the second priority backup input.(None) / [HDMI1] / [HDMI2] / [DVI-D] / [PC] /[COMPONENT]* / [VIDEO] / [USB]The input that is of the same type as the one in usefor viewing will be greyed out.When an analogue (PC, COMPONENT or VIDEO)input is being used for viewing, you cannot set ananalogue (PC, COMPONENT or VIDEO) input as abackup input.Any analogue (PC, COMPONENT or VIDEO)input cannot be set as [Primary backup input] or[Secondary backup input].[Auto switch back mode]Sets whether or not to automatically return to theformer (main) input when the former input videoinitially viewed is restored while viewing the videoof the backup input enabled by the operation of theBackup Input function.[Disable]:Unreturned[Enable]:Returned[Backup input change]Displays whether or not operating conditions for theBackup Input function are met.[Inactive]:Indicates that the conditions are not met, andinactivates the Backup Input function.[Active]:Indicates that the conditions are met, and activatesthe Backup Input function.[Main input]Displays the (main) input initially used for viewing.[Current input]Displays whether the input currently in use for viewingis the (main) input initially used for viewing or thebackup one.*: [COMPONENT] may be displayed as [RGB]depending on the settings of [Component/RGB-inselect]. (see page 47)Setting conditionsThe following table describes restrictions (availablecombinations) on each setting item.MainHDMI1HDMI2DVI-DPCCOMPONENT*VIDEOUSBBackupHDMI1HDMI2DVI-D○ ○ ○PCCOMPONENT*VIDEO×USB ○ ○ ×○: Selectable for both Primary and Secondary.: Selectable for either Primary or Secondary.×: Not selectable for neither Primary nor Secondary.*: [COMPONENT] may be displayed as [RGB]depending on the settings of [Component/RGB-inselect]. (see page 47)